Personal Training Signicade® Templates

Thank you for sharing your review of the Signicade®. We are sorry to hear of your disappointment with the inserts missing the velcro tape, the print quality being grainy, and the delivery being longer than the first order. To help us assist you more effectively, please reply to this email with photos displaying the issues and the order number. If your request is urgent, and you need an immediate solution, please reach out to our Customer Support team via www.vistaprint.com/customer-care/help-center/. We look forward to working with you.

We are so pleased that you are happy with the printing of the inserts for the signicade sign. We regret to hear that the sign you received does not have the hooks for the inserts. There are three ways the inserts can be applied to the frame. (This information can be found under the FAQ section of the product page: www.vistaprint.com/signs-posters/signicade.) Option 1: Hook-and-loop fasteners (Recommended) Clean the sign surface and the back of the insert with rubbing alcohol. Use 8 (4 per side) 2” x 2” hook-and-loop Industrial Strength Fasteners. Apply the rough (male) side to the frame corners, let the adhesive cure for 15 minutes, then attach the sign. These are included with your Signicade® sign. Option 2: Screws Use 8” x 1” sheet metal screws to attach the sign through the frame (4 per side). No pre-drilling required. These are not included with your sign but can be found at a local hardware store. Option 3: Well Nuts & Screws Drill four 15/32” holes in the frame, 2 ¼” from each corner. Insert well nuts, align with ¼” holes drilled in the sign, and secure with ¼”-20 x 1” machine screws. These are not included with your sign but can be found at a local hardware store. We hope one of these two other options will work better for you. Feel free to contact us directly for any further assistance.