It weighs 4,844 grams per square meter (gsm). Our 12" x 18" is 1.5 lbs, while our 24" x 36" size (our largest) weighs 6 lbs.

At this time we only have 1-sided printing but we do offer custom sizes.

Wall clamps come in packs of 2 and we recommend using 1 at the top and 1 at the bottom of your metal sign.

The grooves for wall clamps are .44" from the edge of the sign, so it's wise to make sure that design elements are .44" from the top and bottom edges.

Your package includes printed instructions to help with this process. The clamps come with locator washers, and these washers unlock from the clamps themselves. Use the template included in the instructions to learn where to screw the washers into the wall. Once they're in place, you can attach the sign (with the clamps in place) to the washers. Tighten the washers and you'll be all set.

Our 2 largest sizes, 18" x 27" and 24" x 36", will come with 6 holes. (1 in each corner and 2 in the middle). Our smaller 6 sizes come with 4 (1 in each corner). The middle of each hole is 5/8" from the edge of the sign and the diameter is 3/8". Keep in mind that they are not automatically included, so don’t forget to select “Drilled Holes” before you start designing your sign.

We recommend wiping the front of your sign with a microfiber or lint-free cloth to remove dust. You can also use streak-free glass cleaner to remove stains from the sign’s surface.

Yes we can – visit our design services page for more info or take a look at our signage design article.